Apr 122013
 

As we plan for our big vacation this year, I look back on previous trips and tried to calmly, methodically and (hopefully) dispassionately figure out what I did to safeguard my images and what I did wrong. I have used a variety of devices over the years to safeguard my images, but none of them were a good fit for me.

I have used laptops, but they can be big and heavy (I would like to get a MacBook Pro Retina 13.3″ TBH, but I don’t have the funds right now), especially if you are going to be doing a lot of walking (like nature hikes or pounding the tradeshow beat). Ultrabooks are much lighter, but they cost as much as a Mac Book Pro, so why get a wannabe when you can get the real thing? Like the MBP, Ultrabooks are out of my budget.

iPads and other tablet computers are certainly light enough and have features that I need (I am sitting in a bookstore writing this article on my iPad Mini using a Bluetooth keyboard), but their non-standard way of accessing hardware makes it a bit cumbersome.

I’ve also used “image tanks” – portable hard drives with card readers attached that come with some software to ingest and, on some of the more expensive models, display your images for review. These devices can be pretty pricey and are limited to what RAW files they will display. If you don’t own a CaNikon, chances are slim you’ll see more than the embedded JPEG from the RAW file. (Assuming you don’t shoot RAW+JPEG, but that will cut down on the number shots you can take, or JPEG which will limit your ability to post-process the image).

Ultimately, what I needed was a small computer with an iPad sized screen, built-in card reader, USB ports, WiFi, and a reasonably sized hard drive. I found my answer sitting on my shelf:

IMG 20130409 0010

A Netbook.

Netbooks are small laptops that were all the rage before iPad rose from the sea and crushed them. The few you can find today are being sold at fire sale prices. Netbooks were notoriously underpowered, but only if you were running Windows. There was the trick. Instead of running some species of Windows (mine came with Windows 7 Home), I replaced my Redmondian OS with a flavor of Linux. Specifically, Linux Mint 14.

Linux Mint is a fork of Ubuntu Linux (which is derived from Debian) which comes with a GUI called “Cinnamon” pre-loaded. Cinnamon is very lightweight and modern looking and fits well on the netbook’s smallish screen. Windows 8, in contrast, cannot run Metro UI on a netbook because the resolution is too low. Ubuntu Linux uses the Unity UI which is more touch oriented and needs a bit more screen real-estate to make it not feel cramped.

 

Giving your netbook minty fresh breath (Installing Linux Mint)

Netbooks do not come with optical discs. You can connect a USB powered external disc and install that way, but it’s something else to buy. Instead, I used a 4GB USB drive (I have scads of these laying about from trade shows) and created a bootable disc image on the drive. Linux Mint 14 comes on a DVD sized ISO file so a 4GB USB drive is the smallest size you can use. I purchased this one online. It is by Verbatim and has the virtue of being physically small and thus hard to break.

IMG 20130409 0007
In order to install from a USB drive, you have to properly install the boot image onto the drive. The Ubuntu linux website has some excellent documentation covering this for every platform imaginable. You can read about it here. Insert the USB stick into an open port and boot the netbook (you may have to enter the BIOS by pressing F2 during POST to enable booting from the USB stick). Follow the instructions on screen and install the OS (be sure to use the entire drive dedicated to Linux). Once Linux Mint is installed, connect to the Internet and make sure you run the software updater. This is very important as it will upgrade the OS and all apps to the latest versions.
Once you have the OS installed and configured, you will need to add three applications:
  1. Rapid Photo Downloader
  2. Digikam
  3. Filezilla

You could use Software Manager to install the apps but it is faster to use the command line. To install the applications, open a Terminal window and type the following commands:

sudo apt-get install rapid-photo-downloader
sudo apt-get install digikam
sudo apt-get install filezilla

After the first command, you will be asked for the superuser password. Simply enter your password and you will be granted temporary superuser access. There will be a lot of gibberish flying up the screen between each command. The apt-get tool downloads all of the components needed to install and run the requested app. You will not be asked the password for the second and third commands.

Once you have the software installed, you will need to setup the USB hard drive. This means reformatting the drive. Linux can read, but not write to NTFS. There are some tools you can set up to allow you to do this, but we want to use the drive as a backup to the laptop drive. The easiest way to do this is to format the drive to EXT3 or EXT4 filesystem. You can read a complete set of instructions here. One thing I did find is that in order to make this work, you have to grant yourself security privileges on the external drive. From the command line type:

sudo chown yourid:yourid /dev/diskn (where n is the the disk number of the external drive)
sudo chmod 755 /dev/diskn
IMG 20130409 0011

Once you complete these commands, you should be able to create files and folders on the new drive. At this point, launch Rapid Photo Downloader and configure it to import photos when a card is inserted into the built-in card reader and make sure that you enable the “backup at ingestion” function and configure it to point to the external drive.

You will need to configure Filezilla to access your FTP server. Test to make sure that you can upload files there. Once you import the files, logon to your FTP server using Filezilla and upload your image folders to it.

Mar 242013
 

SAPPHIRE Technology, the leading manufacturer and global supplier of graphics solutions based on AMD technology, has just announced an exciting new graphics accelerator compatible with the Apple Mac Pro series of desktop computers.

Exclusive to SAPPHIRE, the HD 7950 Mac Edition is based on AMD’s latest Graphics Core Next (GCN) architecture. This highly acclaimed architecture delivers a significant graphics performance boost for Mac Pro users in a wide range of applications including gaming, audio or video editing and content creation. For example, gaming frame rates are increased by over 200%, general benchmark performance increased by around 30% and graphics intensive benchmarks increased by as much as 300% compared with the NV 8800GT commonly used in these machines (SAPPHIRE internal data).

Sapphire radeon 7950 mac

The SAPPHIRE HD 7950 Mac Edition is equipped with 3GB of the latest GDDR5 memory, and its Dual Asynchronous Compute Engines (ACE) deliver up to 2.87 TFLOPS Single Precision compute power. It provides hardware support for Open GL 4.2 and Open CL 1.2 as well as AMD HD3D technology and APP acceleration.

AMD’s GCN architecture supports a number of advanced post-processing and scaling operations. These include de-blocking, de-noising, automatic de-interlacing, Mosquito noise reduction and edge enhancement as well as advanced image quality enhancement technology, such as adaptive anti-aliasing and 16x angle independent anisotropic texture filtering. The SAPPHIRE HD 7950 Mac Edition features AMD PowerPlay technology which provides automatic power management during operation and ensures low power consumption under idle conditions.

Flexible display support

Cutting-edge integrated display support includes two mini DisplayPort outputs with a maximum resolution of 3840 x 2160 per display under MacOS X. The card also features a 3GHz HDMI 1.4a port. This output also supports a maximum resolution of 3840 x 2160.

Finally, there is a Dual-link DVI port with HDCP, which supports a maximum resolution of 2560 x 1600. As this is a DVI-I port it can also be used with the older style VGA monitors, with adapter supplied. The card supports two display outputs to be used at the same time, allowing dual monitor configurations to be used for increased productivity.

The SAPPHIRE HD 7950 Mac Edition is compatible with Apple Mac Pro models from 2010 and later with an available PCI-Express x16 slot. Two six-pin power cables required are supplied with the card. A driver disk is provided which enables the card to be used with Mac OS X 10.7.5 (Lion), 10.8.2 (Mountain Lion) or later.

The SAPPHIRE HD 7950 Mac Edition can also be used in the latest PC architectures. It has Dual Firmware support via a simple Firmware (Dual BIOS) switch. In one position the Sapphire HD 7950 MAC Edition supports Mac OS X/Windows under non-UEFI compliant mode and in the other it supports Windows with UEFI hybrid firmware enabled. A Windows driver disk is also included.

Dualfirmwareswitch

Under Windows, additional features are supported, including hardware acceleration of video decoding, HDMI audio pass through and additional display resolutions.

For further details please visit www.sapphiretech.com

All trademarks acknowledged.

Jan 182013
 

MacproThe Mac Pro (aka “The Cheese Grater”) is Apple’s top end hardware offering aimed at power users with demanding compute needs. Oddly enough, it is one of the most reasonably priced models in the workstation market. Another interesting feature is that the Mac Pro has the constitution of a vending machine. I purchased my Mac Pro in March 2008 and it is still serving me faithfully. However, operating systems progress (my Pro came with OS X Leopard and it is now running Mountain Lion) and place more stringent demands on older hardware (having been designed to take advantage of features found in newer equipment) so perceived performance seems to degrade over the years (which conspiracy theorists attribute to the innate evils of capitalism). 

However, the Mac Pro has a feature that no other Mac in the lineup has: easy access to its innards.

Continue reading »

Oct 262012
 

October 25, 2012 – PhotoPlus Expo 2012 opened formally this morning to fairly sizable crowds. As usual, the main entrance was dominated by the Big Three (although Canon and Nikon would call it the Big Two Plus One). Needless to say, the Canon, Nikon and Sony booths were completely stormed by the early onrush.

To be perfectly honest, the Canon and Nikon booths garnered the lion’s share of the visitors. The Sony booth saw a fairly steady stream of visitors. Not surprising considering the number of new products they introduced recently.
Nikon 1 Models V2 & J2

As you can see from the photos, the cameras were under glass. All of the V2′s & J2′s were prototypes and none were availble shots or even handholding. Diasppointing, really.
More frustrating though was the interminalble crowds clogging the Canon booth. If I had to call it, it would be Canon, Nikon, and then Sony.
Undaunted, I proceeded to my first interview of the day:
Datacolor
I had the pleasure of speaking with Mr. David Tobie, Global Product Technology Manager for Datacolor. This man loves color. The product he was so passionate about is the Spyder Capture Pro.
The Spyder Capture Pro is an end-to-end color management solution consisting of the following products:
Spyder Lenscal – Camera lens focus calibration tool. David explained that with Spyder Lenscal you can adjust a zoom lens very specifically. For example, a 70-200 lens can be adjusted to front-focus at the short end  for portrait work and back-focus at the long end for landscape work.
Spyder Checkr – is the ultimate color patch tool. Combined with software, the SypderCheckr will profile your camera’s sensor giving you a preset that can be applied to all photos from that body. This assists in correcting the dynamic range of a photo.
SpyderCube – this is a white balance adjustment tool for color correcting your shots. According to David, most shots only really need adjustment of their dynamic range rather than their color balance.
Spyder4Elite –  this is Datacolor’s best known product, their monitor calibration tool.
These four components, when taken together, allow you to control and calibrate the one piece of the image capture workkflow that was never previously calibrated: the camera.
I will be providing a complete review of the product once my review sample arrives.
 
Cullman Titan Tripods
On my way to another interview, I passed the Cullman booth where they were showcasing the Titan line of tripods. The Titan tripods are kind off unique that the lower leg sections are thicker than the upper pieces. The leg segments are not round but rather a gentle curved trapizoidal shape. When put together, the three legs form a cylinder, making it easier to store.
Tiffen
Tiffen is an umbrella company for a large number of brands. I will need to go through their press releases when I get home to properly report on all that I saw.
Fotodiox

Camera accessory maker Fotodiox introduced two new productsL the WonderPana Filter System for super wide-angle lenses and the WonderBurst wireless photo/flash trigger. The WonderPana comes in two models: the WonderPana 145, which sports 145mm circular filters; and the WonderPana 66 (pictured above) which adds on to the WonderPana 145 and allows it to mount square filters. These square filters can be used alongside the 145mm circular ones.
The WonderBurst also comes in two flavors: the plain WonderBurst for NEX cameras without a standard hotshoe and the WonderBurst HS8000 for cameras with a standard hotshoe. The latter has been tested on Canon and Nikon cameras and it is highly llikely that it will work with the Sony NEX-6 and SLT-A99V. I will test the HS8000 on those cameras once all of that kit arrives.
Sony
Sony had all three of its big Photokina announcements present and available to touch/fondle/drool over. Pictured above is the SLT-A99V aka the Alpha A99. Currently the “king of the hill” in Sony’s SLT offerings, the A99 is made for professionals. I will be providing a full review of this product in the near future.
The Alpha NEX-6 is the newest member of the NEX family, sits squarely between the NEX-5R and the NEX-7. However, is sports some features that the NEX-7 does not have like built-inn WiFi and camera apps.It does have a built-in electronic viewfinder like the one in the NEX-7 and A99. The sensor is 16 megapixels instead of 24 megapixels and has much better high-ISO characteristics. Again, a full review is pending once my copy arrives.
The Sony Cybershot RX1 is a bit of an odd duck. A point and shoot camera with a full frame sensor (the only P&S camera with a sensor that big) a super-high quality fixed Carl Zeiss lens (35mm). I think that this is a  marketing experiment on Sony’s part to gauge the market’s receptiveness to a full-frame interchangeable lens camera. I say bring it on.
Fujifilm X-E1
Fujifilm shook the photographic world up with their X-series of digital cameras. Last year they introduced the X-Pro1 a surprisingly high-end model. This year they brought us the X-E1, a camera with all of the best parts of the X-Pro1 minus the really expensive bits. I hope to have a review sample sometime in the future as well.
That’s it for Day 1. Stay tuned for Day 2.
Aug 272012
 

Adobe has posted the release candidates for Adobe Photoshop Lightroom 4.2 and Adobe Camera Raw 7.2. Release Candidates are not yet final products that have been thoroughly tested. This version of Lightroom addresses several bug fixes and adds support for the following cameras:

  • Canon EOS 650D / Rebel T4i
  • Canon EOS M
  • Fuji FinePix F800EXR
  • Leaf Credo 40
  • Leaf Credo 60
  • Nikon 1 J2
  • Panasonic DMC-FZ200
  • Panasonic DMC-G5
  • Panasonic DMC-LX7
  • Pentax K-30
  • Sony DSC-RX100

You can download the release candidates from here:

Lightroom 4.2

Camera Raw 7.2

Jul 122012
 
Oly logo

Today Olympus announces the release of new firmware for the OM-D E-M5 which offers the following improvements:

  • Improved sleep recovery operation
  • AF target indication when using C-AF+TR while shooting sequential images using Sequential L setting
  • Added function to automatically move focus to the following zoom positions when underwater macro mode or underwater wide mode is selected. (Only when M. ZUIKO DIGITAL ED 12-50 mm F3.5-6.3 EZ is attached) 
  • Underwater wide mode: Wide setting
  • Underwater macro mode: Telephoto setting

Additionally, there is an Olympus Viewer 2 application update for both Windows and Mac that delivers the following:

  1. Added the function to edit movies taken by the camera (mov, mp4)
  2. Added the function to upload images to “My Photos” on (ib on the net). ib on the net is available in Japan and the U.S.A — http://www.ibonthenet.com/ns/service/serviceOutline

Here are the updates:

Firmware Version 1.2 for the OM-D E-M5

Firmware Version 1.4 for Olympus Viewer 2 Software

There are two options for updating the firmware:

    1. Simply launch the included Olympus camera software and connect the camera via USB cable to an internet connected computer. Choose the Update function from the Camera menu in the software to apply available updates for camera bodies, lenses and accessories.
    2. Download the software updater from the following link: http://www.olympusamerica.com/cpg_section/cpg_downloads_updater.asp
      and follow the installer instructions.

    With each method, users can choose to display information related to what the update will apply, prior to performing the update.

    The ability to update the firmware of Olympus digital camera components, bodies, lenses, accessories, and take advantage of some of the latest technologies is one of the key advantages of Olympus’ 100% digital design.

     My OM-D E-M5 + Camdapter Strap

    Dec 062011
     

    Allendale, NJ (December 6, 2011) – Leica Camera, Inc. announces the latest firmware update, 1.176, for the Leica M9 and M9-P, the world’s smallest, full-frame digital system cameras.  Users wishing to benefit from the new offerings can download the firmware update from the Leica Camera website.

    600px-Leica_Camera_logo.svg.png

    Firmware update 1.176 eliminates a rare fault occurring during the formatting of SanDisk cards, ensuring compatibility with the Leica M9 and M9-P in accordance with the cameras’ respective standards. All card types available from SanDisk have been fully tested by Leica’s expert technical team and firmware version 1.176 guarantees their proper function, resulting in the previous constrictions on the cards being revoked.

    Leica Camera is dedicated to providing products that exhibit mastery in optics and mechanics, high-quality design and outstanding craftsmanship, resulting in an uncompromised customer experience. The company thanks all affected customers for their patience and support in searching for the cause of the compatibility issues as well as SanDisk for their intensive technical assistance.

    For installation instructions and to download firmware update 1.176, please visit: http://en.leica-camera.com/service/downloads/rangefinder_cameras/m9_m9-p/index.html.

    About the Leica M9 and M9-P:

    As the world’s first digital rangefinder camera with a 24 x 36 sensor, the Leica M9 carries the proud heritage of the Leica M system into the digital age.  A truly professional camera for authentic Leica M photography in the familiar, classic and timeless M design, the M9 is the perfect contemporary tool for those who set the highest standard in image quality and are committed to creating images of enduring value. The Leica M9-P provides an alternative, even more discreet and resilient design that further reinforces the classic nature of the M9 and specifically meets the needs of professional photographers. The M9 and M9-P are compatible with nearly every Leica M lens in existence.

    Nov 292011
     

    The Sony NEX-7 has been benchmarked on DXOMark.com. As expected, the NEX-7, with its mirrorless design, sligthly bested its larger sibling, the SLT Alpha 77. It even outscored the vernable A900 full-frame camera in all categories except low-light ISO.

    DXOmark-nex7

    One thing to take into consideration is that the A77/A65 just had a firmware update released today. DXOMark will have to rebenchmark the A77 with the new firmware to see if the scores change.

    The firmware on the NEX-7 will probably also be tweaked in the near future. Retesting will have to occur when that happens as well.

    Oct 192011
     

    Mountain View, CA – October 19, 2011 – Today, Lytro, Inc. (www.lytro.com) unveiled the first Lytro consumer light field camera, introducing a new way to take and experience pictures. Unlike conventional cameras, the Lytro light field camera captures all the rays of light in a scene, providing new capabilities never before possible, such as the ability to focus a picture after it’s taken. The pocket-sized camera, which offers a powerful 8x optical zoom and f/2 lens in an iconic design, creates interactive ―living pictures‖ that can be endlessly refocused. The camera is available in two models and three colors, starting at $399.

     

    Lytro Group Stacked

     

    Continue reading »

    Sep 072011
     

     

    CUPERTINO, Calif.–(BUSINESS WIRE)–Seagate (NASDAQ:STX) today announced it is shipping a new 4TB GoFlex® Desk external hard drive – the highest capacity hard drive in the industry. This latest addition to the GoFlex Family of external hard drives showcases Seagate’s new desktop design. The streamlined industrial design delivers a smaller footprint and better reflects the aesthetic of today’s modern offices while still providing all of the benefits of previous generations of the GoFlex drives. The new 4TB GoFlex Desk drive is now available from www.seagate.com and will be available from select online retailers within the month for a manufacturer’s suggested retail price of $249.99 USD. The entire line of GoFlex Desk products will also adopt the new industrial design in the coming weeks. The GoFlex Desk for Mac external drive featuring both FireWire 800 and USB 2.0 will be available in Apple stores by the end of the month.

    Go Flex Desk Bty f 1000px biz wire

    Continue reading »

    Switch to our mobile site